Photovoltaic Rolling Glass Industry-HP ZrO2 Composite Ceramic Lip Brick

Key Point of Lipbrick:

Lip brick is one of the key equipments in the production process of photovoltaic rolling glass. It is used in the front zone of shaping rolls of the glass production line, directly contacts with the glass liquid, and has the direct impact on the yield rate of glass products.The lip brick is desired to have the good thermal shock stability and good alkaline resistance, also the lip brick itself has the short time of bubble-removing, long serving life, high yield rate of glass products etc. performance advantages.

Product Features: ZrO2 Lip Brick

The high-purity and high-performance nano-zirconia composite ceramic lip bricks, which is produced by Fangming NewM, It is used in the front zone of shaping rolls of the glass production line. The size of this product we are supplying can be customized according to customer's required size. It is composed by the several pieces with the seamless joints and the smoothness of the surface is controlled below 0.003 mm. It has the excellent thermal shock stability, the strong erosion of alkaline resistance, long serving life and high yield rate of glass products etc.advantages. We can provide the super-high-temp. ZrO2 nano-ceramic products with the large size and complex shapes, the supplied size ranges: Length of 200-1200MM, width of 200-1000MM, and Height of 15-50MM.

Chemical Composition and Physical Propeties

Size Tolerance:

All size of the ZrO2 Lipbrick is +-2mm.

Company Profile:

Zhengzhou Fangming High Temperature Ceramic New Material Co., Ltd. ( hereinafter referred to as Fangming NewM) setup in Sep., 2015. We are one high-new technology enterprise of producing the high purity and ultra-high temperature new type of the composite nano-ceramic materials and products based on the zirconia material, and urgently much needed to breakthrough key technologies in the new materials category advocated and developed by the state in the 2025 planning catalogue, the High-New Technology manufacturer of the rare composite new materials of the super high temperature structure ceramics, which are applied in the extreme environments.

Main Products:

Fangming NewM have itself R&D, mass produced the super-large-scale and complex shapes, ultra-high-temp. rare-earth oxide composite nano-ceramic products with exacting process requirements. The bulk density can reach 5.5cm/3 and the apparent porosity can be controlled within 1%, and they have the excellent features of thermal shock stability, erosion of the alkaline resistance, crushing resistance at high temperature state,etc.,the physical index is almost the same with the E-fuzed high ZrO2 material, and better quality than other E-Fuzed materials .They are widely used in the metallurgy, casting, glass,artificial crystals, etc. industries, such as the large size and high performance ZrO2 ceramic slide plates used in the large capacity of EAF tap hole industry, and the HP(high performance) ZrO2 composite ceramic lip brick and the special-shaped parts used in the key zones of the ultra-thin Electronic glass industry.

Company Goal:

Ultra-high-temp rare earth oxide composite ceramics products, we will provide the all-round integrated solutions for ultra-high-temp.temperature, high erosion resistance and high erosion application conditions.

Zhengzhou Fangming High Temperature Ceramic New Material Co., Ltd. Lies in Xinmi City, Henan, China. It covers over 20000 sm2.

Setup in Sep. 2015, Fangming NewM is one High-New Technology Enterprise, manufacturing the high-purity and ultra-high-temp. new type of composite nano-ceramic materials and products as the zirconia basic material, and the one of the urgently to be solved and breakthrough key technologies in the new materials category advocated and developed by the state in the 2025 planning catalogue, the one of the rare composite new materials of the super high-temp. structural ceramics, applied in the extreme environments. We has obtained the ISO 9001:2015 quality management, ISO 14001:2015 environmental management and OHSAS 18001:2007 occupational health and safety management system, the energy efficiency management system, etc. series qualifications, and has owned eight patents.

Since setup, our company is devoted to the R&D, creation of the new type of composite nano-ceramic materials and products. Fangming NewM mainly produce: 1). ZrO2 Nozzle, slide plate, ZrO2 Ring, Insert, applied as flow control function in metallurgy at high-temp. State, 2). ZrO2 atomizing nozzle in the amorphous alloy powders, 3).Rare-Earth Oxide Composite SS ceramic thermal field in artificial crystal (Sapphire, laser gem, etc.) grower, 4).Pre-sintered ZrO2 parison, base plate for metal sputtering target, 5). High density ZrO2 ceramic lip brick in ultra thin electronic glass , sintering gasket in electronic device. 6). Device in hot compression equipment of 3D glass, etc. The quality of products we are producing is the same, even better than the one produced by the other producers in the same industry from USA, European countries.

Taking the modernized automatic controlled equipment, persistently carry out the digitized, standardized production and management processes, the advanced ERP and IMES management system in our country, the product’s quality and overall performance has reached even exceeded to the level of the same industry in the world.